fuel_injection_tester
Product description
Explanation for 4 modes Mode
the tester outputs 1 pulse, whose pulse width is about 250ms Mode the tester outputs 50 pulse, every pulse's pulse width is about 7ms Mode the tester outputs 100 pulse, every pulse's pulse width is about 3.5ms Mode the tester outputs pulse continuously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms
All-Sun EM276 Injector Tester Operation Instructions:
Turn off the vehicle's engine Connect Black / Red Clip to the Negative / Positive terminal of battery Connect pulse output terminal to the fuel injector
Press the “MODE SET” key to select the desired pulse mode
Press the “PULSE” key, EM276 tester will output pulse to the injector, and then the pulse signal indicator will light as indication
All-Sun EM276 specification
Power Supply: 12V vehicle battery Operation Environment: 0 ℃ - 40℃, relative humidity < 80% Storage Environment: -10 ℃ - 50℃, relative humidity < 85% Size: 147x82x29mm (for main body only) Weight: about 165g Package Includes: 1pc x Carriable Bag 1pc x Instruction Manual 1pc x Not Include Batteries
fuel_injection_tester.txt · Last modified: by korn