KornEquipped

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Product description

 Explanation for 4 modes  Mode

    the tester outputs 1 pulse, whose pulse width is about 250ms Mode
    the tester outputs 50 pulse, every pulse's pulse width is about 7ms Mode
    the tester outputs 100 pulse, every pulse's pulse width is about 3.5ms Mode
    the tester outputs pulse continuously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms  

All-Sun EM276 Injector Tester Operation Instructions:

 Turn off the vehicle's engine Connect Black / Red Clip to the Negative / Positive terminal of battery Connect pulse output terminal to the fuel injector 

Press the "MODE SET" key to select the desired pulse mode 

Press the "PULSE" key, EM276 tester will output pulse to the injector, and then the pulse signal indicator will light as indication 

All-Sun EM276 specification  

    Power Supply: 12V vehicle battery 
    Operation Environment: 0 ℃ - 40℃, relative humidity < 80% 
    Storage Environment: -10 ℃ - 50℃, relative humidity < 85% 
    Size: 147x82x29mm (for main body only) Weight: about 165g 
    Package Includes:  1pc x Carriable Bag 1pc x Instruction Manual 
    1pc x Not Include Batteries