KornEquipped

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== CN6009 Step-up Dc Power Converter ======

  * 
  * IN-IN + input Positive Input Negative!
  * Positive output OUT + OUT-output negative
  * Test comparison sample reference:
  * Input 3V Output 12V 0.4A 4.8W
  * Input 5V Output 12V 0.8A 9.6W
  * Input 7.4V Output 12V 1.5A 18W
  * Input 12V Output 15V 2A 30W
  * Input 12V Output 16V 2A 32W
  * Input 12V Output 18V 1.6A 28.8W
  * Input 12V Output 19V 1.5A 28.5W
  * Input 12V Output 24V 1 A 24W

DSN6009 4A is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577. XL6009 boost module at a lower cost, superior performance, LM2577 module is about to be eliminated.

  * ? Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
  * ? Wide Output voltage 5V ~ 35V;
  * ? Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
  * ? high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)

Technical parameters: Model Specification Module Properties Non-isolated boost (BOOST)
  * Rectification Non-Synchronous Rectification
  * Input Range 3V ~ 32V
  * Output Range 5V ~ 35V
  * Input Current 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
  * Conversion efficiency <94% (greater the pressure, the lower the efficiency)
  * Switching frequency
  * 400KHz
  * Output Ripple 50mV (the higher the voltage, the greater the current, the greater the ripple)
  * Load Regulation  0.5% Voltage Regulation  0.5% Operating Temperature -40 ?  +85 ? Dimensions 43mm * 21mm * 14mm (L * W * H)